Dynamic Friction Measurements of Egyptian Cotton Yarns Part 1: Study of Frictional Behavior of Two Component Blended Staple Yarns.

Authors

R. El-Bealy, Assistant Professor of Textile Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt.
M. Salama, Assistant Professor of Textile Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt.
S. Ibrahim, Professor of Textile Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt.

Corresponding Author

El-Bealy, R.

Subject Area

Textile Engineering

Article Type

Original Study

Abstract

In the present work, the dynamic frictional characteristics of Egyptian cotton, Misr polyester and cotton/polyester blended staple yarns were studied. The frictional coefficient of yarns have been determined by wrapping around a cylindrical pin. The electronic F-Meter R 1182 of firm Rotschild zurich was used. The frictional coefficient blended yarns was found to be influenced by fiber constituents, blend proportion, yarn linear density, threadline speed, pretension and angle of contact (loop size).

Recommended Citation

El-Bealy, R.; Salama, M.; and Ibrahim, S. (2020) "Dynamic Friction Measurements of Egyptian Cotton Yarns Part 1: Study of Frictional Behavior of Two Component Blended Staple Yarns.," Mansoura Engineering Journal: Vol. 11 : Iss. 2 , Article 4.
Available at: https://doi.org/10.21608/bfemu.2021.183942