•  
  •  
 

Corresponding Author

Shahin, Ahmad

Subject Area

Textile Engineering

Article Type

Original Study

Abstract

In this York the characteristic of the used control system for let-off mechanism on sulzer weaving machine with double warp beam was studied. The distribution of maximum dynamic warp tension (due to beating-up at bottom shed) vas measured across the width of warp sheet in 30 position (15 position per warp beam). it was found that the level of warp tension at checking side of weaving machine (drive side for reed) is higher than the warp tension on the other side. From the study of the characteristic for let-off mechanism it was found that the effect of increase in warp tension at checking side of weaving machine has an influence on the rate of flow for warp sheet at this side.

Download

Share

COinS