Subject Area
Production Engineering and Mechanical Design
Article Type
Original Study
Abstract
As a result of driving wide weaving machines double warp beam from one side, torsion occurs in the main driving shaft, which in turn affects on the non uniform advance of the reed. during the beat up of the weft yarn. This in turn leads to the increase in the rate of warp yarn tension from the checking side than the picking side., hence the warp yarn in the checking side will be consumed than that in the picking side. In the present work the proplem of non-uniform advance of the reed has been solved by reducing the twisting angle of the main driving shaft, through the optimum design of the shaft or by different mechanical devices. Also the selection of the most suitable material and the minimum cost of the driving shaft
Recommended Citation
El-Toukhy, Abdallah
(2021)
"Design the Main Shaft of Wide Weaving Machine for Equally Sided Reed Advance.,"
Mansoura Engineering Journal: Vol. 17
:
Iss.
3
, Article 7.
Available at:
https://doi.org/10.21608/bfemu.2021.170501
