The Use of Anion-Exchange Resin (A 162) as a Bromine Carrier for the Bromination of 2 Acylfurans.

Authors

M. Fayed, Chemical Engineering Department., Military Techenical College., Cairo., Egypt.
M. Sadek, Chemical Engineering Department., Military Techenical College., Cairo., Egypt.
Ibrahim Rashed, Professor of Physical Science Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt.

Corresponding Author

Fayed, M.

Subject Area

Mathematics and Engineering Physics

Article Type

Original Study

Abstract

The anion-exchange resin A-162 commercially available in the chloride form was prepared in the perbromide form to be used as brominating agent for the bromination of 2-acylfurans. The monobromo derivatives were obtained in very high yield at normal temperature without the appearance of byproducts. The resin was separated at the end of the reaction by simple filteration and could be recycled for further runs.

Recommended Citation

Fayed, M.; Sadek, M.; and Rashed, Ibrahim (2021) "The Use of Anion-Exchange Resin (A 162) as a Bromine Carrier for the Bromination of 2 Acylfurans.," Mansoura Engineering Journal: Vol. 17 : Iss. 3 , Article 9.
Available at: https://doi.org/10.21608/bfemu.2021.188729