Volume 20, Issue 1 (1995)
Original Studies
Performance and Creep Characteristics of Synthetic Geogrids Following Hot Dry Climate.
H. Al Mudhaf and M. El Shabrawy
Subject Area: Civil and Environmental Engineering
Comparison between Theoretical and Experimental Investigation of Composite Beams with Spiral Shear Connectors.
Saad Eldeen Abd-Rabou and Mohamed Dahson
Subject Area: Civil and Environmental Engineering
Thermal Behaviour Topological Analysis of High Starting Torque Squirrel Cage Rotor Winding.
M. El-Shamoty
Subject Area: Electrical Engineering
A Microprocessor Based Load Voltage Regulator for Photovoltaic Systems.
Wagdy Anis and Abd El-Shakour El-Samahy
Subject Area: Electronics and Communication Engineering
Subject Area: Electrical Engineering
Transient Stability Analysis Based on the Post-Disturbance Two-Machine Equivalent.
Attia Attia
Subject Area: Electrical Engineering
Calculations of Capacitive Take-off Power (CTP) from High Voltage Transmission Lines.
Alaa El-Din Ali
Subject Area: Electrical Engineering
Effect of Heat Treatment on the Corrosion Behaviour of Rapidly Solidified Al-8Ni-2Co Alloy in NaCl Solution.
Fawzy El-Sabbahy, M. Kassem, and R. Ramadan
Subject Area: Mechanical Power Engineering
Natural Convective Flow in a Multilayered Vertical Porous Media.
Mohamed El-Kady
Subject Area: Mechanical Power Engineering
Closed-Die Forging of Gear Like Element.
A. El-Domiaty, Mohamed Shabara, and A. Al-Ansary
Subject Area: Mechanical Power Engineering
Stages of Mechanical Alloying of Al-20 Wt %Si.
Magdy Kassem
Subject Area: Mechanical Power Engineering
Different Design Aspects of Swirl Jet Using Vortex Generating Jets.
Nabil Moustafa and U. Vandsburger
Subject Area: Mechanical Power Engineering
Computer-Aided Fit, Tolerances and Limit Gauges Design Using Expert System (EXCAT).
Ibrahim Elewa
Subject Area: Production Engineering and Mechanical Design
Tempering of AISI 416 Martensitic Stainless Steel.
Mohamed Abd El-Hady
Subject Area: Mechanical Power Engineering
A Comparative Experimental Study on the Human and Artificial Hip Joint: Stress Analysis with Static Load Time and Impact Load.
Yousef Ibrahim, O. El-Awadi, M. Zaki, and El-Sayed Abd El-Rassoul
Subject Area: Production Engineering and Mechanical Design
Effect of Heavy Liquid Fuel Temperature on the Twin Fluid Atomization Characteristics.
Hanafi Shabana, Safwat Wilson, and Awad Syam
Subject Area: Mechanical Power Engineering
An Experimental Investigation on Flow Field in a Dump Combustor Model.
Ahmed Slleem, E. Wahba, and M. Naser
Subject Area: Mechanical Power Engineering
Subject Area: Textile Engineering
Perpendicular-Laid of Nonwoven Fabrics - Part I. The Relationship between Thermal, Compressional Properties and Blend Ratio of PES and Cotton Fibers.
Adel El-Habiby and Oldrich Jirsak
Subject Area: Textile Engineering
A Study of the Plied Yarn Twist Factor.
Ismail Mousa Rakha, Rizk Mahmoud El-Bealy, and M. El-Messiry
Subject Area: Textile Engineering
A Study on the Plied Cotton Ring Spun Yarn Tenacity.
Ismail Rakha
Subject Area: Textile Engineering
Measurement of Fabric Handle by Using a Cylindrical Hole of Sponge.
Hemdan Abou Taleb
Subject Area: Textile Engineering
Subject Area: Electrical Engineering
Forced Convection Heat Transfer from a Flat Plate at Different Locations between Plates Array.
Mohamed Shalaby
Subject Area: Mechanical Power Engineering
Development of Cylindrical Filters Used in Conventional Cotton Opening Lines.
Hemdan Abou Taleb
Subject Area: Textile Engineering
