Subject Area
Textile Engineering
Article Type
Original Study
Abstract
The aim of this work is to fix the weight per unit area of the polyester fabrics. This is happens by changing the weft density according to it's count. Three weft counts were chosen for this study 100, 150, 300 denier twisted / untwisted polyester yams, where the warp was constant in all cases. The results obtained showed that the finer weft counts (higher density) give higher crease recovery fabrics, where the thicker weft counts (lower density) give fabrics that have more strength, air permeability and thickness.
Recommended Citation
Sakr, Aly
(2021)
"The Effect of Changing Weft Counts & Density for the Same Weight Per Unit Area on some Properties of Produced Fabric.,"
Mansoura Engineering Journal: Vol. 28
:
Iss.
2
, Article 16.
Available at:
https://doi.org/10.21608/bfemu.2021.141401
