Subject Area
Mechanical Power Engineering
Article Type
Original Study
Abstract
Heat transfer and pressure drop were measured for flow of air through a horizontal tube filled with porous media with internal induction heat generation. The heated copper test section has an inside diameter of 0.02 m, and 0.225 m long. The porosity was varied from 0.2527 to 0.5251 using uniform spherical steel beads. These beads are internally heated by passing alternative current through an induction coil wrapped around the tested tube. Over the range of 250
Keywords
Porous media; Heat generation; Induction heating
Recommended Citation
Sultan, Gamal
(2021)
"Heat Transfer Characteristics with Internal Heat Generation through Porous Medium.,"
Mansoura Engineering Journal: Vol. 29
:
Iss.
3
, Article 8.
Available at:
https://doi.org/10.21608/bfemu.2021.140363
