Heat Transfer and Flow Visualization of Separated Reattached Air Flow over Reversed Rectangular Flat Plate.

Authors

M. Shalaby, Mechanical Power Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt.Follow
F. Araid, Mechanical Power Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt.

Corresponding Author

Shalaby, M.

Subject Area

Mechanical Power Engineering

Article Type

Original Study

Abstract

Average heat transfer coefficients during forced convection air flow over reversed rectangular flat plate have been experimentally determined. The experiments are carried out for a constant surface temperature and covered reverse les from 0 to 60 deg, and Reyonolds numbers from 7.5 x 104 to 22.5 x 104. The results show that the average heat transfer coefficient is a function of Reyonlds number and the reveres angles. Correlation equation for various angles of reverse is suggested.

Recommended Citation

Shalaby, M. and Araid, F. (2021) "Heat Transfer and Flow Visualization of Separated Reattached Air Flow over Reversed Rectangular Flat Plate.," Mansoura Engineering Journal: Vol. 12 : Iss. 1 , Article 6.
Available at: https://doi.org/10.21608/bfemu.2021.173950