Volume 12, Issue 1 (1987)
Original Studies
The Potentialities of Glass Fibre Reinforced Concrete for Structural Uses.
A. Abdel-Reheem, M. Kamal, and Adel Mohamed El-Hadidy
Subject Area: Civil and Environmental Engineering
The Impact Resistance of Concrete Beams Externally Reinforced with Non Woven Fabric.
A. Abdel Reheem, H. Shaheen, and Adel El-Hadidy
Subject Area: Civil and Environmental Engineering
A Simple Approach to Optimal Conductor Sizing for a Radial Distribution Feeder with Laterals.
K. Shebl and A. Abou El-Ela
Subject Area: Electrical Engineering
Reliability and Economics of PVPS - UG Aggregation: Estimation and Analysis.
H. El-Tamaly and M. El-Maghraby
Subject Area: Electrical Engineering
Theoretical and Experimental Heat Conduction in a Cladded Rod with Internal Heat Generation and Non-Uniform Surface Cooling.
Mohamed Mahgoub, A. El-Hadik, and M. Shalaby
Subject Area: Mechanical Power Engineering
Heat Transfer and Flow Visualization of Separated Reattached Air Flow over Reversed Rectangular Flat Plate.
M. Shalaby and F. Araid
Subject Area: Mechanical Power Engineering
The Optical Analysis of an Asymmetrical Piece-Wise Concentrator.
Helmy Gad, H. El-Seddiek, and M. Awad
Subject Area: Mechanical Power Engineering
Performance of an Intermittent Absorption Cycle refrigerator Producing Continuous Cooling Effect.
Helmy El-Sayed Gad and A. Hamed
Subject Area: Mechanical Power Engineering
Subject Area: Mechanical Power Engineering
On the Thermodynamics of Dual Purpose Power Desalting Plants with Gas Turbine.
M. Darwish, A. El-Hadik, and A. Dayoub
Subject Area: Mechanical Power Engineering
Wear of Involute Helical Gears.
Ahmed El-Bahloul
Subject Area: Production Engineering and Mechanical Design
Effect of Nature of the Surface of the Condensate Film on Condensation Heat Transfer.
Mohamed Mahgoub
Subject Area: Mechanical Power Engineering
Investigation of El Bahr El Sagheir as a Source for Drinking Water.
Ibrahim Rashed, Salah El Begawy, Mohamed El Dessouky, and Mahmoud El-Komy
Subject Area: Mathematics and Engineering Physics
Quality Assessment of 2/2 Z Twill Cotton Fabrics Woven with various Float Lengths.
Hemdan Abou-Taleb and Ahmed El Deeb
Subject Area: Textile Engineering
Study of some Factors Affecting Weft Tension during Unwinding from Shuttle.
A. Shahin
Subject Area: Textile Engineering
Structure of Non-Woven Fabrics Part. IV Compressional Properties of Needle Punched Non-Woven Fabrics.
M. El-Gaiar and Adel El-Hadidy
Subject Area: Textile Engineering
Factorial Treatment of the Effect of Spinning Variables on the Quality of Cotton/Polyester Yarns.
Rizk El-Bealy and S. Ibrahim
Subject Area: Textile Engineering
Initial Tension Variation during Unwinding of Knitting Yarn from Packages.
A. Shahin and M. El-Gaiar
Subject Area: Textile Engineering
New Parameters for Assessment of Maturity of Cotton Fibres.
Adel El-Hadidy
Subject Area: Textile Engineering
Measurement of Thermal Conductivity of Fabrics.
Hemdan Abou- Taleb
Subject Area: Textile Engineering
Structure of Non-Woven Fabrics Part V-New Parameters for Assessing Structure of Laminated Non-Woven Fabrics.
Adel El-Hadidy
Subject Area: Textile Engineering
The Effect of Air Pollution on Garments of Labours Working in Fertilizer Factories.
Ibrahim Rashed, A. Bastawissi, A. El-Hossini, and Aly Saker
Subject Area: Textile Engineering
Synthesis of some New Disperse Dyes for Dyeing Polyester Fibre.
A. El-Hossini, M. Ali, and H. Hasan
Subject Area: Textile Engineering
