Volume 14, Issue 2 (1989)
Original Studies
A Multilayered Thickness Design Method for Highways in Egypt.
Hazem Sakr
Subject Area: Civil and Environmental Engineering
Plane Stress Analysis of Circular Plates by the Nodal Line Finite Difference Method.
Youssef Agag
Subject Area: Civil and Environmental Engineering
Nodal Line Finite Difference Method for the Analysis of Circular Cylindrical Shells.
Youssef Agag
Subject Area: Civil and Environmental Engineering
Improving Properties of Lightweight LECA Concrete by Partial Replacement with Gravel.
A. Abd El-Reheem and M. Kamal
Subject Area: Civil and Environmental Engineering
Analysis of Linear Synchronous Motor Fed with Current Source Inverter at High Speeds and Low Speeds.
S. El-Drieny, M. El-Shamoty, and A. Amin
Subject Area: Electrical Engineering
An Arabic Integrated Computer Software package for promotions and Encouraging Superadditions.
Mofreh Mohamed
Subject Area: Computer and Control Systems Engineering
Stability Analysis of Power System Using DSM.
Ibrahim Mansy
Subject Area: Computer and Control Systems Engineering
Large-Area Polycrystalline Silicon Substrates Using Unidirectionally Solidified Metallurgical-Grade Silicon for Solar Cell Applications.
Roshdy Abderrassoul
Subject Area: Electronics and Communication Engineering
An On-Line Technique for Talkha Power Station Interlocking Using a Topological Description.
E. Abd-Raboh
Subject Area: Electrical Engineering
Laminar Flow between Coaxial Rotating Cylinders.
H. Mansour
Subject Area: Mechanical Power Engineering
Numerical Simulation of Flows in an Engine Cylinder with an Eccentric Deep Bowl Combustion Chamber during Compression (1st Report, Formulation and Algorithm).
M. El-Kady, H. Mascheck, and A. Hoche
Subject Area: Mechanical Power Engineering
Numerical Simulation of Lows in an Engine Cylinder with an Eccentric Deep Bowl Combustion Chamber during Compression (2nd Report: Numerical Example).
M. El-Kady, H. Mascheck, and A. Hoche
Subject Area: Mechanical Power Engineering
Effect of the Injector Viscous Damping on the Mass of Fuel injected During the Delay Period in Diesel Engines.
M. El-Kady and Salah El-Emam
Subject Area: Mechanical Power Engineering
Study on a Self-Explosion in an Aspirin Production Factory.
M. Zaki, A. El-Toukhy, and El-Sayed Rassoul
Subject Area: Production Engineering and Mechanical Design
Measurement of Residual Stresses in Structural Elements of Ships Using Sectional Method.
Ishak Shehata
Subject Area: Mechanical Power Engineering
Subject Area: Mechanical Power Engineering
On the Vibration Spectrum Analysis of Planar Mechanisms.
M. Mostafa, Mohamed Shabara, A. El-Bahloul, and Mohamed Fanny
Subject Area: Production Engineering and Mechanical Design
Subject Area: Production Engineering and Mechanical Design
Performance of a Spark Ignition Engine Working on a Gas Fuel-Air Mixture with a Partial Injection of Liquid Spray.
Salah El-Emam
Subject Area: Mechanical Power Engineering
Simplified Measurements of the Heat Transfer Coefficient.
A. El-Hadik and H. Barrow
Subject Area: Mechanical Power Engineering
Effect of Tropical Weather on the Thermal Capability of Cooling Towards Constructed in the Arabian Gulf Area.
A. El-Hadik and A. El-Obaid
Subject Area: Mechanical Power Engineering
A Study on Radiolysis of 2- Propanol in The Presence of Furanic Ketones.
M. El-Dessouky and I. Rashed
Subject Area: Mathematics and Engineering Physics
Utilization of Light Microscope in Detecting Deterioration, Degradation, and Quality of some Egyptian Cottons.
Adel El-Hadidy
Subject Area: Textile Engineering
The Mechanical Properties of Needle Punched Fabrics by Using Mechanical or Electrical Models.
Adel El-Hadidy
Subject Area: Textile Engineering
Evaluating Fatigue Lifetime of Polyester-Cotton Blended Yarns.
Hemdan Abou-Taleb
Subject Area: Textile Engineering
Improvement of Servicability Properties of Egyptian Military Fabrics.
Hemdan Abou- Taleb
Subject Area: Textile Engineering
The Apparent Loss of Twist in Open-End Cotton/Polyester Blended Yarns.
Rizk El-Bealy and Ismail El-Metwally Rakha
Subject Area: Textile Engineering
Effect of the Dynamic Movement for Yarn Brake on the Variation in Yarn Tension.
A. Shahin
Subject Area: Textile Engineering
Study the Problem of Remaining Length's Variation of Warp at Double Beams Sulzer Weaving M/C.
A. Morsy
Subject Area: Textile Engineering
Reliability Evaluation and Failure Characteristics of Electric Power Utility.
A. Aly
Subject Area: Electrical Engineering
Subject Area: Civil and Environmental Engineering
Predicting the Transient Stability of Ceps Using AES Method.
Ibrahim Mansy
Subject Area: Electrical Engineering
Experimental Investigation of Heat Transfer from a Vertical Rod-Bundle into Two-Phase Flow.
S. Hanna, Mohamed Mahgoub, and H. Mostafa
Subject Area: Mechanical Power Engineering
