Volume 16, Issue 2 (1991)
Original Studies
Some Relationships among Residual, Micro-Structure, and Micro-Hardness Ensued due to Vertical End Milling Operations.
M. Abdel-Moneim, M. Shaker, Mohamed Shabara, A. El-Domiaty, and A. Nassf
Subject Area: Production Engineering and Mechanical Design
Influence of Scoured Beds on the Characteristics of Seepage underneath Structures.
Adel El-Masry
Subject Area: Civil and Environmental Engineering
Sequentially Adaptive Differential Pulse Code Modulation Using Adaptive LSP Filters.
Fayez Zaki
Subject Area: Electrical Engineering
The Importance of Phase in Biological Signals.
Fatma Abou-Chadi
Subject Area: Electronics and Communication Engineering
Performance Characteristics of a Slotted-Cage Solid Rotor Three-Phase Induction Motor with Constant-Voltage Source (Experimental Investigation).
A. Amin, M. El-Shammoty, and S. El-Drieny
Subject Area: Electrical Engineering
Hardware Implementation of Continuously Variable Slope Adaptive Delta Modulator.
Fayez Zaki
Subject Area: Electrical Engineering
An Adaptive Identification Algorithm for Electro-Mechanical Systems.
Fayez Areed
Subject Area: Computer and Control Systems Engineering
Dynamic Characteristics of Industrial Robots, Using Segmented Trajectories.
F. Areed
Subject Area: Computer and Control Systems Engineering
A Classifing Bibliography on Computer Operating Systems.
Mofreh Salem
Subject Area: Computer and Control Systems Engineering
Power System Planning in Developing Countries - The Case of Jordan.
Hafez El-Zayyat, Zainel-Abideen Tahboub, and Fawwaz El-Karmi
Subject Area: Electrical Engineering
Cost of Electricity Outage in Jordan.
F. Elkarmi, H. El-Zayyat, and Z. Tahboub
Subject Area: Electrical Engineering
On Line Algorithm for Line Overload Alleviation.
K. Yassin, E. Abd-Raboh, and E. Towfik
Subject Area: Electrical Engineering
Computer Control in Power Systems.
E. Abd-Raboh and A. Ibrahim
Subject Area: Electrical Engineering
Output Feedback Stabilization of Discrete Systems.
Hisham Soliman
Subject Area: Electrical Engineering
Design of a Robust Electro-Mechanical Control System.
Sabry Saraya and Fayez Areed
Subject Area: Computer and Control Systems Engineering
Converging-Diverging Duct Heat Transfer and Hydrodynamic Resistance for Turbulent Water Flow.
M. Awad, M. Shalaby, and S. El-Shazly
Subject Area: Mechanical Power Engineering
Condensation Heat Transfer Considering Actual Film Surface.
Mohamed Mahgoub
Subject Area: Mechanical Power Engineering
The Application of Linear Elastic Fracture Mechanics Analysis to Bluntly Notched Round Bar Specimens.
Mohamed Shabara
Subject Area: Mechanical Power Engineering
Mathematical Model for Frost Formation on Plane Surface.
Ahmed Ahmed Sultan
Subject Area: Mechanical Power Engineering
Heat Transfer from Constant Heat Flux Cylindrical Wall to Liquid Flow through Packed Beds.
Ahmed Ahmed Sultan and E. El-Shafei
Subject Area: Mechanical Power Engineering
Subject Area: Mechanical Power Engineering
Flash Temperature for W/N Circular Arc Gears.
Ahmed El-Bahloul
Subject Area: Production Engineering and Mechanical Design
Analysis of Transient Heat Conduction in a 2-D Rectangular Fin.
Mohamed Mahgoub
Subject Area: Mechanical Power Engineering
Analytic Solution of two-Dimensional Transient Heat Conduction.
Bishri Abdel-Hamid and Mohamed Mahgoub
Subject Area: Mechanical Power Engineering
Factors Affecting Drag Reduction by Non Ionic Surfactant Additives.
M. Hamza, I. Saleh, and S. Nasr
Subject Area: Mathematics and Engineering Physics
Drag Reduction in Pipelines by Cationic Surfactant Additives.
M. Hamza, I. Saleh, and S. Nasr
Subject Area: Mathematics and Engineering Physics
Utilization of Textile Wastes in Nonwovens - Part I: Properties of Industrial Needle Punched Nonwovens out of Textile Wastes.
Adel El-Hadidy
Subject Area: Textile Engineering
Theoretical Prediction of the Pore Size of Woven, Knitted and Nonwoven Filter Fabrics.
Hemdan Abou-Taleb
Subject Area: Textile Engineering
Study of some Affecting Parameters on Warp Strength in the Woven Fabric.
A. Shahin and A. El-Deeb
Subject Area: Textile Engineering
Influence of the Cleaning Operation on the Quality of the Yarn.
Rizk El-Bealy and Mahmoud Talat
Subject Area: Textile Engineering
Quality Assessment of Nonwoven Air Filters used in Fertilizer Factories.
S. Ibrahim, M. El-Messiery, Hemdan Abou-Taleb, M. Salama, and N. Mostafa
Subject Area: Textile Engineering
Stastical Analysis of some Loom Parameters Affecting Yarn Stops on Air Jet Loom.
Mahmoud Salama
Subject Area: Textile Engineering
Microprocessor Based PID Controller Design and Implementation.
Kamel Soliman, Sabry Saraya, and Wael El-Wasif
Subject Area: Computer and Control Systems Engineering
