Volume 14, Issue 1 (1989)
Original Studies
Evaluation of the Direct Filtration under the Egyptian Conditions.
Ahmed Fadel and Hesham El-Etriby
Subject Area: Civil and Environmental Engineering
Some Studies on Local Sand Composites with Unsaturated Polyester Resins.
N. Doss and S. Tawfik
Subject Area: Civil and Environmental Engineering
Nodal Line Finite Difference Method in the Analysis of Rectangular Plates on Elastic Foundation.
Youssef Agag
Subject Area: Civil and Environmental Engineering
Plane Stress Analysis of Simply Supported Rectangular Plates by the Nodal Line Finite Difference Method.
Youssef Agag
Subject Area: Civil and Environmental Engineering
Effects of Opening the First Phase of Cairo Metro Regional Line on Method Split Ratios Different Station.
Ahmed Abd ElMegeed and El-Sayed Shawaly
Subject Area: Civil and Environmental Engineering
The Finite Element Contribution to Electrical Machine Design.
I. Amin
Subject Area: Electrical Engineering
Design and Implementation of a Stabilizing Network for Reluctance Motors.
S. Osheba and F. Abdel Kader
Subject Area: Electrical Engineering
Optimal Sensitivity Method for Multi-Machine Digital Control Systems.
A. Abd El-Gawad
Subject Area: Electrical Engineering
Optimal Application of Shunt Compensation for Distribution Systems.
M. Dessouky, A. Sallam, W. Rached, and A. Zeitun
Subject Area: Electrical Engineering
Numerical Solution of Magnetostatic Field in and around Current Carrying windings of Electrical Machines.
S. Elorieny, M. El-Shamoty, and A. Amin
Subject Area: Electrical Engineering
Investigation of Incompressible Rough-Wall Boundary Layer Flows.
Samir Hanna and Berge Djebedjian
Subject Area: Mechanical Power Engineering
A Doppler-Mei Combination Technique for Simultaneous Measurements of Size and Velocity Distributions of Spray Droplets.
Salah El-Emam and Mizutani Yasuhiro
Subject Area: Mechanical Power Engineering
Investigation on Incompressible Turbulent Boundary Layer with Maximum Deceleration.
Samir Hanna
Subject Area: Mechanical Power Engineering
An Investigation on the Emissions in a Torch Chamber S.I.E.
M. Awad, A. Desoky, and A. Abdelkhalek
Subject Area: Mechanical Power Engineering
Shading Effect of a South Building on the Solar Collector Aperture.
H. Gad
Subject Area: Mechanical Power Engineering
Thermodynamic Analysis of a Simple Gas Turbine Cycle When Using H2 NH3 and C3H8 Fuels.
A. Desoky
Subject Area: Mechanical Power Engineering
Numerical Prediction of The Gas Flows in a Reciprocating Engine Cylinder during Intake Stoke (1st Report: Inviscid Flow).
M. El-Kady, El-Shafai Beder Zedan, and M. Awad
Subject Area: Mechanical Power Engineering
The Impact of Atmospheric Conditions on Gas Turbine Performance.
A. El-Hadik
Subject Area: Mechanical Power Engineering
Trace Metals in Sediments from El-Ryah El Twfiky and some of Its Extensions.
Ibrahim Rashed, M. El-Dessouky, Hoda Ashry, and Salah Begawy
Subject Area: Mathematics and Engineering Physics
Regeneration of Soot Produced from Partial Oxidation of Natural Gas.
Ibrahim Rashed
Subject Area: Mathematics and Engineering Physics
A Study on the Radiolysis of 2-Furanyl Ketones in 2-Propanol in Presence and Absence of Atmospheric Oxygen.
Mohamed El-Dessouky and Ibrahim Rashed
Subject Area: Mathematics and Engineering Physics
Optimization of Blend Ratio and Twist Multiplier for Polyester /Cotton Shirt Fabrics Part ii: Tensile Properties of Produced Fabrics.
Hemdan Abou- Taleb
Subject Area: Textile Engineering
Effect of Pretreatment and Dyeing on Strength and Quality Number of Giza 75 Cotton Fibers.
Adel El-Hadidy
Subject Area: Textile Engineering
Effect of the Dimensions of Balloon Breaker with Triangular Cross Section on Yarn Tension (Part II)
Ismail El-Metwally Rakha and A. Shahin
Subject Area: Textile Engineering
Effect of the Shape of Balloon Breaker on Yarn Tension during Unwinding from COPS Part ( I).
A. Shahin
Subject Area: Textile Engineering
Behaviour of Egyptian Cotton Fibers in Opening and Cleaning Process.
Rizk El-Bealy
Subject Area: Textile Engineering
A Proposed Pay Adjustment Method for Highways Construction.
Hazem Sakr
Subject Area: Civil and Environmental Engineering
Time and Memory Storage Saving in the Analysis of Symmetric Planar Microwave Circuits.
Hamdi Elmikati, El-Helaly Eid, and Maher Abdel-Razzak
Subject Area: Electronics and Communication Engineering
Influence of Fineness and Density of Weft Threads on the Warp Tension.
A. Morsy
Subject Area: Textile Engineering
