Volume 16, Issue 1 (1991)
Original Studies
Effect of rotor spinning parameters on waste and short-staple cotton yarn quality
Rizk El-Bealy Associ.Prof and Ismail Rakha Associ.Prof
Subject Area: Textile Engineering
A Tauberian-Prony Feature Extraction Technique for Esophageal Motility Patterns.
Fatma El-Zahraa Abou-Chadi, F. Ezzat, N. Gad-Elhak, A. Sif El-Din, and M. Ismail
Subject Area: Electronics and Communication Engineering
Spectral Averaging Techniques for Unsynchronized Waveforms.
Fatma El-Zahraa Abou-Chadi
Subject Area: Electronics and Communication Engineering
Influence of Polymer Insulating Barriers on the AC Breakdown Behaviour of Small Oil Gaps.
Fathi Youssef
Subject Area: Electrical Engineering
Optimum Design of Small Autonomous System with Unconventional Energy Sources.
Mohamed Mohamed El-Sayes
Subject Area: Electrical Engineering
Optimal Control Implementation for Linear Systems via Riccati Equation.
K. Soliman
Subject Area: Computer and Control Systems Engineering
Modeling and Simulation for Multivariable Chemical System in Semadco Urea-Plant.
K. Soliman and N. Mekkawy
Subject Area: Computer and Control Systems Engineering
Computation of the Electrostatic Fields to Evaluate the Compression of Eccentric Insulation in Power Cables.
S. El-Dessouky and O. Gouda
Subject Area: Electrical Engineering
Using Multiple Objective Techniques to Model Hierarchical Production Planning (HPP) Problems (Part 1: Theoritical Study).
M. Rasmy and S. Ismail
Subject Area: Electrical Engineering
Using Multiple Objective Techniques to Model Hierarchical Production Planning (HPP) Problems (Part II: Computational Study).
M. Rasmy and S. Ismail
Subject Area: Electrical Engineering
Geosynthetics in Soil Improvement. Types, Functions and Principal Uses.
N. El-Shabrawy, F. El-Shibini, and H. Al Mudhaf
Subject Area: Civil and Environmental Engineering
Stability Checks of Columns and Beams in Braced Frames Using Elastic Effective Lengths.
Ahmed Badr
Subject Area: Civil and Environmental Engineering
Flow Resistance in the Damietta Branch of the Nile River.
Mahmoud El-Gamal
Subject Area: Civil and Environmental Engineering
Behavior of Hydraulic Jump DN a Stilling Basin II.
Mahmoud El-Gamal
Subject Area: Civil and Environmental Engineering
Solution of Parabolic Navier-Stokes Equations for the Entrance Region-Flow between two Parallel Plates.
Mohamed Wasel
Subject Area: Mechanical Power Engineering
Some Observations on the Fracture Characteristics and Fatigue Crack Growth Rates in a High Strength Aluminum Alloy.
Mohamed Shabara and Ahmed Mostafa
Subject Area: Production Engineering and Mechanical Design
Drag Coefficient of Single Spherical Particle in Drag Reducing Polymer Fluids.
L. Rabie and M. Kamel
Subject Area: Mechanical Power Engineering
Experimental Study on the Effect of Spiral Spring Inserts in a Circular Tube in Case of Forced Convection Heat Transfer.
M. Shalaby, Ahmed Sultan, and F. Araid
Subject Area: Mechanical Power Engineering
The Effect of Tripping Wire Rings on the Average Heat Transfer from a Cross Circular Cylinder.
Ahmed Sultan, M. Shalaby, and F. Araid
Subject Area: Mechanical Power Engineering
A Suggested Blending Routing for Iron Ore from El-Gedida Mines.
E. Rasoul, A. Etman, and Abobakr El-Saiedy
Subject Area: Mechanical Power Engineering
Balancing and Simulation Algorithm For Manual Assembly Line Operations.
M. Abdel-Shafi
Subject Area: Mechanical Power Engineering
Natural Convection Heat Transfer from a Uniform Heat Flux Plate with Arbitrary Orientation.
Ahmed Sultan
Subject Area: Mechanical Power Engineering
Effect of Vertical End-Milling Operations up on some Mechanical Properties of Free Machining Brass Plates.
M. Abdel-Moneim, Mohamed Shabara, A. El-Domiaty, M. Shaker, and A. Nassf
Subject Area: Production Engineering and Mechanical Design
A Modified Procedure for Slope Ratio Method in Analysis of 1:1 Complex Compounds.
M. El-Dessouky
Subject Area: Chemical Engineering
An Empiric Procedure for Modified Utilization of Beer-Lambert Law for the Spectrometric Analysis of Simple Solutions.
Mohamed El-Dessouky, Mahmoud El-komy, and Ibrahim Rashed
Subject Area: Mathematics and Engineering Physics
Factors Influencing the Air Resistance of Acrylic Single Jersey Fabrics.
Hemdan Abou-Taleb
Subject Area: Textile Engineering
A Theoretical Study of the Relation between Wrinkle Resistance and Crease Recovery Angle of Apparel Fabrics.
Hemdan Abou-Taleb
Subject Area: Textile Engineering
Reduction of Weft Tensile Stresses during Picking on High Production Weaving Machines.
Ahmad Shahin
Subject Area: Textile Engineering
Characteristic of Let-off Mechanism for Wide Weaving Machines with Double Warp Beam.
Ahmad Shahin
Subject Area: Textile Engineering
Control of Noils and Fiber Length Parameters in Cotton Combers.
R. El-Bealy and M. El-Messiery
Subject Area: Textile Engineering
Main Factors Affecting the Strength and Durability of Concrete Bricks.
Ahmad Abdel-Reheem
Subject Area: Civil and Environmental Engineering
