Volume 20, Issue 2 (1995)
Original Studies
Application of Coherency Measure to Identify Coherent Croup in Power Systems.
Mahmoud Ali, Atef El-Emary, and Fahmy El-Bendary
Subject Area: Electrical Engineering
An Applied Study about Transferring Personnel Files in Faculty of Specific Education El Mansoura into Micro Film.
Ahmed El-Said
Subject Area: Electrical Engineering
Autoregressive Modeling of Geomagnetic Data.
Fatma Alzahraa Abou Chadi, F. Ahmed, and M. Abou El-Soud
Subject Area: Electronics and Communication Engineering
Economical High Frequency Voltage Source Inverter System.
Ibrahim El-Sayed
Subject Area: Electrical Engineering
AC-DC Converter Operation for Active Sinusoidal Line Converter.
Ibrahim El-Sayed
Subject Area: Electrical Engineering
An Expert System for Network Design Operation and Diagnosis.
Aida Abd El-Gawad
Subject Area: Computer and Control Systems Engineering
Influence of Magnetic Field upon the Wear of Steel/Steel and Brass/Steel Combinations under Dry and Lubricated Conditions.
Moustafa Mohamed
Subject Area: Mechanical Power Engineering
Inhibitive Efficiency of Zinc Organo Amino Phosphate for the Corrosion of α-Brass in 0.5 M Sulphuric Acid Solution.
Fawzy El-Sabbahy and Mahmoud Abbas
Subject Area: Mechanical Power Engineering
An Experimental Study on Heat Transfer and Pressure Drop of Air-Solids Turbulent Flow inside a Horizontal Tube with Different Entrance Angles.
M. Zahran, S. Abdel-Moneim, and N. Berbish
Subject Area: Mechanical Power Engineering
A Study on the Electrochemical Behaviour of 416 and 440C Martensitic Stainless Steels in Alcohols.
Mohamed Abd El-Hady
Subject Area: Mechanical Power Engineering
Investigation of Flow Characteristics of a Turbulent Annular Impinging Jet.
M. Zahran and R. Khater
Subject Area: Mechanical Power Engineering
Computer Aided Foundry Mold Design.
Abdel-Razek Aboul-Nour, Tawfik El-Midany, Farouk Shehata, and Adham Ragab
Subject Area: Production Engineering and Mechanical Design
Forced Convection Heat Transfer in a Cylindrical Porous Media exposed to Constant Wall Heat Flux.
Mohamed El-Kady
Subject Area: Mechanical Power Engineering
Geometry of Plain Woven Fabric Made from Flexible Yarns.
Hamdy Ebraheem
Subject Area: Textile Engineering
Synthesis of Substituted Phenylazocoumarin Ring by Condensation of Activated Nitriles, 4-Hydroxy-5-Phenylazo Salicylaldehyde and Ketones by Means of Ammonium Acetate.
Abd El-Latief El-Hossini
Subject Area: Textile Engineering
Computer-Aided Machine Tool Selection (Numerical or Conventional) with respect to Cost Assessment (CAMTS).
Ibraheem Elewa
Subject Area: Production Engineering and Mechanical Design
