Volume 35, Issue 1 (2010)
Original Studies
Rural Sustainable Development According to World Trends and Local Planning.
Nanees Ali Alsayyad and Sherief Sheta
Subject Area: Architectural Engineering
Influence of Paint Type on Steel Corrosion for Marine Applications.
Abdou Abdel-Samad, Yaser Soud, and M. Zaki
Subject Area: Production Engineering and Mechanical Design
Production Planning and Scheduling in Knitted Garment Mill.
S. El Gholmy
Subject Area: Textile Engineering
Analysis and Design of Microstrip Filters Using Photonic Band Gap Ground Plane with Fractal Periodic Pattern.
Hamada Elsaied and Maher Abd Elrazzak
Subject Area: Electrical Engineering
A New Technique for Controlling Hybrid Stepper Motor through Modified PID Controller.
Sabry Saraya, Mohammed Elksasy, and Hesham Gad
Subject Area: Computer and Control Systems Engineering
Learning of Artificial Neural Networks by Genetic Algorithms.
Jamal Abdul Fatah Azzam
Subject Area: Electrical Engineering
Direct Torque Neuro-Fuzzy Control of an Induction Motor.
Fayez Areed, Amira Haikal, and Reham Mohammed
Subject Area: Computer and Control Systems Engineering
Comparative Analysis Methods of Direct Torque Control for Induction Motor.
Fayez Areed, Amira Haikal, and Reham Mohammed
Subject Area: Computer and Control Systems Engineering
Acceptable DG Capacity for Radial Distribution System Based on Traditional Protection Scheme.
Mahmoud Kandil, Mohamed Osman, Magdi El-Saadawi, and Mohamed Saeed
Subject Area: Electrical Engineering
Modeling of Variable Speed Wind Turbines with Doubly Fed Induction Generator for Studying Steady State Operation.
Magdi El-Saadawi, Sahar Kaddah, Mohamed Abd El-Hamid Osman, S. El-Drieny, and M. Abdel-Wahab
Subject Area: Electrical Engineering
Implementation of Electronic Nose Using Neural Network.
B. Khairallah and T. Hegazy
Subject Area: Electrical Engineering
Applying PSO Technique for Optimum Siting and Sizing of DG in Distribution Systems.
I. Mansy, A. Abdrabu, M. Salem, and A. Rasheed
Subject Area: Electrical Engineering
Analysis of Practical Parameters Required for Power Line Carrier (PLC) System Design.
El-H. Abd-Rabol, Magdi El-Saadawi, A. Hassan, and A. Al-Sarraf
Subject Area: Electrical Engineering
Identity as an Approach to Community Sustainability According to Society.
Madiha Amasha, Sherief Sheta, and Ahmed Rashed
Subject Area: Architectural Engineering
Towards Sustainable Systems of Architectural Education in Egypt - Comparative Analytical Study of the Academic Programs.
Alaa ElAishy and Saad Saad
Subject Area: Architectural Engineering
Rehabilitation as a Heritage Environment Investment Tool.
Asmaa El-Badrawy and Alaa El-Eishy
Subject Area: Architectural Engineering
Variables of the Built Environment in Light of the Decisions of Economic Openness (An Analytical Study of Urban Change Pattern of the City of Port Said after Announcing a Free City).
Amira Ibrahim, Osama Farag, and Mohammed Elazab
Subject Area: Architectural Engineering
Study the Effect of High Voltage Power Lines on the Results of Differential Static-GPS Applications.
Mahmud Shetawl and Mohamed Mousa
Subject Area: Civil and Environmental Engineering
Effect of Corrosion Inhibitors Admixtures on Corrosion Rate of Steel Reinforcement in Concrete.
Mahmoud Imam, Ali El- Agamy, Mohamed Mahdy, and Ahmed Abdel-Fattah
Subject Area: Civil and Environmental Engineering
Productivity Performance Estimation in Egyptian Construction Projects Based on Regression Analysis.
A. El-Kholy
Subject Area: Civil and Environmental Engineering
Investigating ACI 318-08 Punching Shear Provisions for Design of Isolated Footings.
Samir Shihada
Subject Area: Civil and Environmental Engineering
Fault Detection and Identification of Three Phase Overhead Transmission Lines Ended with Underground Cables.
A. Elmitwally, S. Mahmoud, and M. Abdel-Rahman
Subject Area: Electrical Engineering
Fault Diagnosis in Machining Based on Statistical Process Control.
M. El-Baz
Subject Area: Mechanical Power Engineering
Numerical study on Natural Convection and Fluid Flow Inside a Tilted Wavy Enclosure.
H. Sarban
Subject Area: Mechanical Power Engineering
Dynamic Test Specifications for Diagnostic and Control of Parameters in Tribo Systems.
Mohammed AlNawafleh
Subject Area: Mechanical Power Engineering
Convection Heat Transfer and Pressure Drop for Dilute Polymer Solutions Flow inside Multi-Channels Flat Tube.
Hesham Mostafa and Tarek Oda
Subject Area: Mechanical Power Engineering
Natural Convection Heat Transfer from Discrete Heat Sources Mounted in Rectangular Enclosure Surrounded by a Single-Phase Liquid Coolant.
S. El-agouz, M. Bekheit, and A. Kabeel
Subject Area: Mechanical Power Engineering
Effect of Air Recirculation on Compressor Performance.
Aly El-Zahaby, El-Shenawy Abd-Elhameed, Zakarya Zyada, Khaled Eldin, and Mohamed Salem
Subject Area: Mechanical Power Engineering
Database for Optimal Selection of Cutting Conditions, Forces and Power Consumption in Machining Processes.
A. El Bahloul, I. Eleva', Fatma Elerian, and E. Gadelmawla
Subject Area: Mechanical Power Engineering
Solar air conditioning systems.
Mohammed Ali Al-Dabbas
Subject Area: Mechanical Power Engineering
Thermal Stability of Poly (2-Acrylamido-4- Antipyrinyl) Thiazole Homopolymer and Copolymer of 2-Acrylamido-4- Antipyrinyl Thiazole with Methyl Methacyylate.
A. ELAgamey, M. Diab, A. El-Sonbati, and H. Abd-ElGhany
Subject Area: Mathematics and Engineering Physics
Thermal Stability and Degradation of Chitosan Modified by Benzophenone.
M. El-Halwany, M. Diab, A. EI-Sonbati, and D. Bader
Subject Area: Mathematics and Engineering Physics
Effect of High Concentrations of Alkaline Mediums in Wet Processing on Cellulosic Materials.
A. Ramadan, A. Hebeish, A. El-Hossini, and I. Rakha
Subject Area: Textile Engineering
Effect of Loading Rates in Free Water Surface Constructed Wetlands for Treating Polluted Water, Case Study: Bahr El-Baqar Drain.
Mahmoud Elsheikh, Hazem Saleh, Diaa El Quosy, and Abdallah Mahmoud
Subject Area: Civil and Environmental Engineering
H∞ Robust Controller for a Long VSC-HVDC Link Connected to a Weak Grid.
Mohamed Rashed, El-Sayed Abulanwar, and Fathi Youssef
Subject Area: Electrical Engineering
The Reduction of Exhaust Emissions from Jordanian Diesel Vehicles.
Mohammed Al-Dabbas
Subject Area: Mechanical Power Engineering
Syntheses and Characterization of Anti-Inflammatory Cupper II Complex.
Moamen Refat, Mohamed El-Garib, A. El-Korashy, and Mostafa Hussien
Subject Area: Mathematics and Engineering Physics
