Volume 15, Issue 2 (1990)
Original Studies
A New Approach of using the Transportation Model for Evaluating Housing Projects.
Mostafa Al-Ahwal
Subject Area: Civil and Environmental Engineering
A Review of Conventional Friction Formulae.
Mohamed Shamaa, A. Zidan, and S. Sakia
Subject Area: Civil and Environmental Engineering
Comparison of Observed and Estimated Shared Left-Turn Lane Capacity at Signalized Intersections.
El-Sayed Shawaly
Subject Area: Civil and Environmental Engineering
Recycling of Dolomite and Basalt Asphalt Mixes of Existing Highway at Damietta Governerate.
Ahmed Abdel-Reheem, Hazem Sakr, and Al-Hosain Aly
Subject Area: Civil and Environmental Engineering
Behaviour of Plain and Reinforced Concrete: Specimens Subjected to Nitrate Solution.
Ahmed Abdel-Reheem
Subject Area: Civil and Environmental Engineering
Coherent Averaging in the Presence of Noise.
Fatma Abou-Chadi
Subject Area: Electronics and Communication Engineering
Hardware Algorithm for Static and Dynamic Rams Testing.
Mofreh Mohamed and Aida El-Gwad
Subject Area: Computer and Control Systems Engineering
Performance Evaluation of Movable Head Disk Schedulers.
Mofreh Salem
Subject Area: Computer and Control Systems Engineering
Effects of Components Nonidealities upon the Performance of Adaptive Antenna Array Processors.
Fayez Zaki
Subject Area: Electrical Engineering
Stabilisation of Double Excited Induction Machine used in WECS in two Modes of Operation.
M. El-Hagry, A. Mohamed, and N. Iskander
Subject Area: Electrical Engineering
Integration of Wind Turbine Generators (WTG's) and Solar Photovoltaic Cells for Powering Loads in Remote Sites.
Mohamed Adel Mohamed El-Sayes and Mohamed Othman
Subject Area: Electrical Engineering
Application of Pearson Type III Statistics to High Voltage Breakdown Realizations.
Fathi Yousef
Subject Area: Electrical Engineering
Influence of Contaminated Drops on Polymeric Insulation Surfaces in the Vicinity of High Voltage Tracking.
S. El-Dessouky
Subject Area: Electrical Engineering
Accurate Calculation of very High Divergent Electric Fields of High Voltage Systems.
Fathi Youssef
Subject Area: Electrical Engineering
Improvement of Epitaxial Silicon Solar Cells on Upgraded Metallurgical Silicon by Heat Treatment.
Roshdy Abderrassoul
Subject Area: Electronics and Communication Engineering
II - VI Compound Semiconductor Polycrystalline Thin Film Solar Cells: A Review.
R. Abderrassoul and S. Rassoul
Subject Area: Electronics and Communication Engineering
Printed Arabic Text Recognition Algorithms.
Mofreh Salem Mohamed, Aida Abd El-Gwad, Fatma El-Zahraa Abou-Chadi, and Mohamed Keshk
Subject Area: Computer and Control Systems Engineering
Subject Area: Electrical Engineering
Transient Thermal Performance of a Single Cooling Channel in a PWR Reactor Core.
Mohamed Ahmed Mahgoub
Subject Area: Mechanical Power Engineering
Case Study for Replanning the Layout Using Group Technology and Flow Analysis Technique.
Tawfik El-Midany and A. El-Bahloul
Subject Area: Production Engineering and Mechanical Design
Subject Area: Mechanical Power Engineering
Effect of Air Injection Method on the Performance of Air-Lift Pump.
H. Mansour and M. Khalil
Subject Area: Mechanical Power Engineering
The Influence of Electro-convection on the Efficiency of Finned Air Coolers under Condition of Frost Formation.
Fathy Abdel Aal
Subject Area: Mechanical Power Engineering
A Comparative Evaluation for Manual and Computer Graphics Based System for NC Programming.
Tawfik El-Midany and M. El-baz
Subject Area: Production Engineering and Mechanical Design
Objective Evaluation of Quality of Cotton Denim Jean.
Hemdan Abou- Taleb
Subject Area: Textile Engineering
Factors Affecting Weft Stresses on Shuttleless Weaving Machines.
Ahmed Shaheen
Subject Area: Textile Engineering
Theoretical and Experimental Studies for Thread Floating in the Fabric.
Ahmed El Deeb and A. Shaheen
Subject Area: Textile Engineering
Theoretical Prediction of the Air Permeability of Acrylic Plain Weft Knitted Fabrics.
Hemdan Abou-Taleb
Subject Area: Textile Engineering
Novel Approach for Predicting Degradation of Cotton Fabrics.
Adel El-Hadidy
Subject Area: Textile Engineering
Study of Dynamical Warp Tension Behaviour at High Speed Air-Jet Weaving Machine (Model Taudekoma).
A. Moray and Ahmed El Deeb
Subject Area: Textile Engineering
Subject Area: Textile Engineering
Structure of New Types of Filter Bags out of Textile Waste.
Adel El-Hadidy
Subject Area: Textile Engineering
An Investigation to the Influence of Sizing Machine Settings on Thread Properties.
M. Salama, M. El-Missery, S. Ibrahim, and H. Behes
Subject Area: Textile Engineering
Effect of the Avearage Warp and Weft Density On C*, H* and L* of Dyed Cotton Fabrics.
Abd El-Latief El-Hossini Salem
Subject Area: Textile Engineering
